anchor your sailboat
After studying the chart and choosing a general protected area, look for a spot with the right depth: from a few feet deeper than the draft of your boat (at low tide) to as deep as 30-40 feet if necessary—if you have at least 200-300 feet of anchor rode.; make sure you are well clear of any channel regardless of how the boat swings with wind shifts, and that there are no hazards if your boat. If you ask ten sailors what the best anchor is, you’ll get ten different answers. furthermore, what works for one sailboat/one sailor won’t necessarily work for you. a better question to ask regarding the best anchor for your sailboat is this: my boat is a (type of boat), it weighs (weight), has a beam of (width), i plan on anchoring predominantly in (area – eg.. The key to properly anchoring your boat is setting the anchor. you want to ensure it sets well by applying tension to the rode to ensure the anchor will penetrate the bottom. you will need to apply a small amount of power in reverse to ensure the anchor sets. if your boat is still moving, you will need to reset the anchor and try again..
anchor your sailboat Another frequent use of two anchors is to set a stern anchor directly opposite the bow anchor to keep your boat from swinging in a crowded place —but only if the weather conditions allow it, meaning that are rather stable and calm. now, you will find that setting double anchors can be kind of tricky sometimes.. Route your anchor line on the outside of the boat, bow to stern, to avoid catching the rode on anything. power into deeper water and turn the boat toward shore. considering that your boat will end up closer to shore in about waist-deep water, plan your scope so that your anchor will set well..
Komentar
Posting Komentar